The Roborock Qrevo CurvX is a high-end robot vacuum and mop combination that pushes several design boundaries in the category. Its standout traits are an ultra-slim 3.14-inch profile that slides under low furniture, a first-of-its-kind liftable chassis system for navigating thresholds and furniture legs, and a fully automated dock that handles mop washing, drying, dustbin emptying, and water tank refilling. If you want a robot that handles the cleaning cycle with minimal involvement from you, this one is built around that goal.
Key Features
- 22,000Pa HyperForce suction for deep carpet and hard floor cleaning
- 3.14-inch (7.98 cm) ultra-slim body — the slimmest in Roborock’s lineup
- RetractSense Navigation: LiDAR tower retracts under low furniture, rises for 360° scanning in open areas
- AdaptiLift Chassis: lifts the full chassis up to 4 cm, or adjusts individual sections (front, rear, left, right) to navigate thresholds and furniture legs
- Dual Anti-Tangle System with DuoDivide main brush and arc-shaped FlexiArm side brush
- Reactive AI 3.0 obstacle recognition using structured light and RGB camera
- Dual spinning mop pads with up to 12N downward pressure; automatically lift when transitioning to carpet
- FlexiArm edge mopping system for wall edges and corners
- Multifunctional Dock 3.0 Thermo+: 176°F (80°C) hot water mop washing, 113°F (45°C) warm air drying, auto dust emptying (up to 7 weeks capacity), auto tank refilling, dock self-cleaning
- Intelligent Dirt Detection adjusts mop wash duration based on actual dirt levels
- 5,200 mAh battery with approximately 220 minutes runtime in Quiet mode
- Real-time video calling and two-way voice interaction via the Roborock app
- Pet recognition: robot detects and moves around pets to avoid startling them
- SmartPlan 2.0: learns cleaning habits and adapts to room types and floor surfaces
- Compatible with Alexa, Google Home, and Apple Home
Specifications
| Specification | Detail |
|---|---|
| Suction Power | 22,000 Pa (HyperForce) |
| Robot Height | 3.14 in / 7.98 cm |
| AdaptiLift Max Height | 4 cm |
| Battery Capacity | 5,200 mAh |
| Runtime (Quiet Mode) | Approx. 220 minutes |
| Mop Wash Water Temp | Up to 176°F (80°C) |
| Warm Air Dry Temp | 113°F (45°C) |
| Auto-Empty Capacity | Up to 7 weeks |
| Mop Downward Pressure | Up to 12N |
| Noise Level (Mop Mode) | As low as 53 dB |
| Navigation | LiDAR + Structured Light + RGB Camera |
| Smart Home Compatibility | Alexa, Google Home, Apple Home |
| App | Roborock App (iOS/Android) |
Product Overview
The most distinctive engineering feature here is the combination of RetractSense navigation and the AdaptiLift Chassis working together. The Upward Range Finder continuously measures overhead clearance, automatically lowering the LiDAR tower when the robot approaches low furniture and raising it back up in open areas for full 360-degree mapping. This means the CurvX maintains accurate navigation even in spaces where most LiDAR-equipped robots would either get stuck or skip entirely. The AdaptiLift Chassis adds another layer of adaptability — it can raise the entire body to clear thresholds up to 4 cm, or tilt individual sections to compensate for uneven terrain. According to Roborock, this is an industry first that entered mass production in Q3 2024.
The cleaning system pairs the DuoDivide main brush — two short parallel rollers that guide debris toward the central inlet — with the FlexiArm arc-shaped side brush that uses centrifugal force to redirect hair away from the brush ends. The intent is to significantly reduce the tangling that typically requires manual brush cleaning on other robots. The mop setup uses dual spinning pads with meaningful downward pressure, and when the robot crosses onto carpet, the mops and chassis lift together to prevent wetting carpet fibers and to keep the suction port clear. For edges, the FlexiArm mopping system extends to reach along walls and into corners that centre-mounted mop systems typically miss.
Dock automation is comprehensive on the CurvX. The Multifunctional Dock 3.0 Thermo+ uses water heated to 176°F to wash mop pads after each run, then dries them with warm air to prevent mildew. Intelligent Dirt Detection monitors how dirty the wash water is and extends the wash cycle or triggers an additional mop pass if the floors in a given area were particularly soiled. The dock also cleans itself with hot water and automatically refills the robot’s clean water tank before the next scheduled run. Manual involvement is mostly limited to filling the clean water tank and occasionally emptying the dirty water tank, depending on your dock configuration.
What’s in the Box
- Roborock Qrevo CurvX robot vacuum and mop
- Multifunctional Dock 3.0 Thermo+
- Dust bag(s) for the dock
- Mop pads
- Power adapter
- Documentation
Note: Exact box contents should be confirmed on the Amazon product listing, as configurations may vary.
Check current pricing and availability for the Roborock Qrevo CurvX on Amazon.
